UTILITY SPIGOT SPOUT

The Utility Spigot attachement is intended for use with water in the following areas but is not limited to:

• Washing Hands
• Washing Dishes
• Rinsing Food
• Filling Containers

1. Remove the Utility Tank’s factory spout using a wrench.
2. Grab spout elbow, twist, and pull assembly away from the body of the
3. Lubricate o-rings with water on new assembly.
4. Insert the end of the Spigot attachment into the valve opening, (NOTE: Press straight into the valve opening until fully seated).
5. Hand tighten nut (careful not to overtighten or cross threads).SureCanUSA | Best Gas Can
6. Use thin black Velcro to strap thumb button down on the handle.
7. Rotate Spigot attachment down into desired position
8. When ready lift spigot lever to dispense water.
9. (Apply additonal Velcro to the side of the Utiliity Can for mounting optional soap dispenser. Soap dispenser not included.)

4.5" H x 2.5" W x 1" D